KTM 1090 / 1190 / 1290 Adventure R – Protection Combo

Upper Crash Bars

• Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance. Although our welders make those welds look like art.
• 22mm steel tube with 2mm wall thickness – Matches the specs of the specs of the factory KTM crash bars
• Less is often more – One of our goals was to preserve the low center of gravity feature of the KTM 1090/1190/1290(R) Adventure by using the same tubing diameter as the KTM factory crash bars. Many other manufacturers use 25mm and even 27mm tubing to protect the upper part of your KTM but it adds up to 1-1.5kg extra, thus making it top heavier while not guaranteeing better impact absorption.
• Tough mounting points – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 5mm thick metal mounts. These parts absorb a lot of impacts from crashes, rather than your bikes chassis that”s worth thousands of dollars/Euros.
• Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

Compatibility:

Upper crash bars:
1090 R / 1290R: 2017 / 2018 / 2019 / 2020. S model can work as long as it’s equipped with OEM lower crash bars.
1190: 2015-2016 models only (earlier 1190 models have their original KTM crash bars located about 25mm/1” lower and those are not compatible with our upper crash bars).

Skid Plate

• Protects crucial areas of the engine – oil pan, engine case, oil cooler, oil filter and exhaust header! That’s a long list of very expensive parts to expose to any sort of damage that will reduce your KTM 1090 / 1190 / 1290 R’s value in no time.
• Uniquely designed vent system – Not only unique but very-well thought out. No unnecessary holes were designed on this bash plate. As a result, your engine will less likely to overheat when mud and all sorts of debris from off-roading fly at the engine and get stuck between the skid plate and the engine/exhaust header.
• Embossed ribs – These additional ribs add a lot of strength to the skid plate where it matters the most: the bottom. By embossing these ribs into the skid plate, we increase the cross-section of the material to about 9mm, hence this area is nearly twice as strong as other parts. Not to mention, these ribs act like gliders while your skid plate tries to slide over rocks, logs and other hard obstacles on offroad trails. Smaller surface means less resistance.
• True off-road and adventure shape – What does that even mean?? It means we have experience in building top-notch bash plates. We avoid designing skid plates that are shaped like boxes, have sharp edges and corners and will guaranteed to restrict your rides off road. We design and build skid plates that you will only benefit from while riding on rough terrain.
• 5mm thick laser cut aluminum – Nothing is ever an overkill on an adventure bike, hence we choose to build our bash plates from this ridiculously tough and thick, yet lightweight material.
• Tough mounting hardware – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 4 and 5mm thick metal mounts. These parts absorb a lot of impacts from riding through (off-road) hell, rather than your bikes chassis or engine that are worth thousands of dollars.
• Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

Compatibility:

Skid plate:
1090 R / 1290R: 2017 / 2018 / 2019/2020. S model can work as long as it’s equipped with OEM lower crash bars.
1190 R / S: 2013-2016 all years.